PC8 firmware: news - novità

🇺🇸 This forum ONLY contains issues related to the PC8 Firmware 2.5.x
🇮🇹 Questo forum contiene SOLO problematiche relative al firmware 2.5.x del PowerControl8
User avatar
Tillquist
Posts: 108
Joined: Mon Feb 13, 2017 6:13 am
Location: Denmark
Contact:

Re: PC8 firmware: news - novità

Post by Tillquist »

simone wrote: Thu Feb 23, 2017 9:18 am
Tillquist wrote: Thu Feb 23, 2017 9:12 am Suggestions !!!!
How about an option to upload to Endomondo?
Are there customers around this service? To be honest I never get requests.
I am sure that if the opportunity is there, so it is also used.
Image
D e n m a r k

Use Image with Power2max Type-S and Power2max NG power meter.
Spawer
Posts: 29
Joined: Wed Feb 15, 2017 12:34 pm

Re: PC8 firmware: news - novità

Post by Spawer »

simone wrote: Thu Feb 23, 2017 8:27 am
Spawer wrote: Wed Feb 22, 2017 6:16 pm Ultimo aggiornamento provato oggi , il gps a ripreso funzionare , son sincero e un po' più lento ad acquisire il segnale rispetto a prima di iniziare il beta test , ora anche ora di partenza su strava e corretta , può essere che anche con il power meter la comunicazione è un po' lenta ? Nel senso che se iniziò una ripetuta o la finisco per 2/3 sec rimangono i valori precedenti , è normale ?
No, la modifica non inficia in ANT+
A ok , allora è una mia impressione . Ti volevo chiedere un altra cosa , io ho due power meter Srm il più vecchio " non mi vorrei sbagliare mi pare Pm6" il PC8 non mi da i dettagli dello stato della batteria , cosa che il pc7 invece lo vedevo , parlando con Alessia mi a detto che è normale . Chiedevo ,secondo il mio punto di vista e utile , nell'aggiornamento risolvere anche questo problema . Grazie.
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone »

Spawer wrote: Thu Feb 23, 2017 12:00 pm
simone wrote: Thu Feb 23, 2017 8:27 am
Spawer wrote: Wed Feb 22, 2017 6:16 pm Ultimo aggiornamento provato oggi , il gps a ripreso funzionare , son sincero e un po' più lento ad acquisire il segnale rispetto a prima di iniziare il beta test , ora anche ora di partenza su strava e corretta , può essere che anche con il power meter la comunicazione è un po' lenta ? Nel senso che se iniziò una ripetuta o la finisco per 2/3 sec rimangono i valori precedenti , è normale ?
No, la modifica non inficia in ANT+
A ok , allora è una mia impressione . Ti volevo chiedere un altra cosa , io ho due power meter Srm il più vecchio " non mi vorrei sbagliare mi pare Pm6" il PC8 non mi da i dettagli dello stato della batteria , cosa che il pc7 invece lo vedevo , parlando con Alessia mi a detto che è normale . Chiedevo ,secondo il mio punto di vista e utile , nell'aggiornamento risolvere anche questo problema . Grazie.
Preciso! il PM6 non ha queste info. Sono a livello di firmware del PM6, quindi non c'entra nulla il PC8!
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
amesser325
Posts: 11
Joined: Mon Feb 13, 2017 12:20 am

Re: PC8 firmware: news - novità

Post by amesser325 »

Would it be possible to add a power meter battery level metric to the firmware? That would be very nice to have rather than guess at when the power meter has to be sent in for a new battery.

Thanks,

Andy
User avatar
Tillquist
Posts: 108
Joined: Mon Feb 13, 2017 6:13 am
Location: Denmark
Contact:

Re: PC8 firmware: news - novità

Post by Tillquist »

amesser325 wrote: Thu Feb 23, 2017 12:40 pm Would it be possible to add a power meter battery level metric to the firmware? That would be very nice to have rather than guess at when the power meter has to be sent in for a new battery.

Thanks,

Andy
PC8 displays a message when the battery gets low.
Image
D e n m a r k

Use Image with Power2max Type-S and Power2max NG power meter.
eduriz
Posts: 55
Joined: Mon Feb 13, 2017 10:01 am

Re: PC8 firmware: news - novità

Post by eduriz »

update del firmware a 2.5.3 fatto.
Ho avuto alcuni problemi con il sensore Cardio. Non lo riconosceva più. Entrato fatto pairing e poi x i primi 20-25min la frequenza era sempre su 240-250 poi ha iniziato a funzionare!

Il resto tutto ok upload via wifi ecc. no problem!

allego file screenshoot il .fit file non lo posso allegare non mi lascia

cia
edi
RasmussM
Posts: 118
Joined: Mon Feb 13, 2017 7:02 am
Location: Denmark

Re: PC8 firmware: news - novità

Post by RasmussM »

HI,

Have tested interval longer than 20 min. , and it was working.

Was there news about the TP upload ?
amesser325
Posts: 11
Joined: Mon Feb 13, 2017 12:20 am

Re: PC8 firmware: news - novità

Post by amesser325 »

Tillquist wrote: Thu Feb 23, 2017 12:48 pm
amesser325 wrote: Thu Feb 23, 2017 12:40 pm Would it be possible to add a power meter battery level metric to the firmware? That would be very nice to have rather than guess at when the power meter has to be sent in for a new battery.

Thanks,

Andy
PC8 displays a message when the battery gets low.
what is the effective battery life left at that point? It would be helpful in terms of planning since it's ~1.5-2wks round trip to send off the PM for service.

Thanks,

Andy
amesser325
Posts: 11
Joined: Mon Feb 13, 2017 12:20 am

Re: PC8 firmware: news - novità

Post by amesser325 »

Would there be any impact to the cadence or power reading as a result of the recent firmware updates? I noticed this morning on the trainer during a steady state effort there were a few times when cadence would jump 2 - 3 rpm then return. For example I was targeting 95 rpm and seemingly hold that cadence steady but would occasionally see dips into 92 rpm for a second or two then return. I know perhaps the trainer could have some impact (Jet Black direct drive) but it does have significant rotational mass so I would think the impact would be minimal. Anecdotally, I don't recall seeing big jumps like that before.
I do need to qualify my question in that I've not looked into the smoothing settings (I just thought of this a few minutes ago) but I've not changed any settings on my end.
I can post the raw .fit file as it's still on the PC8, if so desired.

Thanks,

Andy
Spawer
Posts: 29
Joined: Wed Feb 15, 2017 12:34 pm

Re: PC8 firmware: news - novità

Post by Spawer »

simone wrote: Thu Feb 23, 2017 12:11 pm
Spawer wrote: Thu Feb 23, 2017 12:00 pm
simone wrote: Thu Feb 23, 2017 8:27 am
No, la modifica non inficia in ANT+
A ok , allora è una mia impressione . Ti volevo chiedere un altra cosa , io ho due power meter Srm il più vecchio " non mi vorrei sbagliare mi pare Pm6" il PC8 non mi da i dettagli dello stato della batteria , cosa che il pc7 invece lo vedevo , parlando con Alessia mi a detto che è normale . Chiedevo ,secondo il mio punto di vista e utile , nell'aggiornamento risolvere anche questo problema . Grazie.
Preciso! il PM6 non ha queste info. Sono a livello di firmware del PM6, quindi non c'entra nulla il PC8!
A ok , però con il pc7 si vedono le ore rimanenti
Post Reply