PC8 firmware: news - novità

🇺🇸 This forum ONLY contains issues related to the PC8 Firmware 2.5.x
🇮🇹 Questo forum contiene SOLO problematiche relative al firmware 2.5.x del PowerControl8
Post Reply
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone »

MARKE wrote: Fri Feb 17, 2017 3:14 pm Hello
Install DA beta worked perfect
Install upaste beta firmware no PC8 worked perfect
First Test riding on rollers: GPS signal [OFF mode] because I was at home
Altitude calibration didn't work. My house is 140 m slm and PC8 showed -3 m. As the previous version I have to use manual calibration to obtain rigth data.
¿Can you explain how to configure the new calibration feature and how it works?
Used Power2max type S. Calibration worked
Crank length showed "n/a" I tried enter manually and showed "n/a"
All of my screens during training worked fine.
Ciao, here I tried to explain the altitude process!, please, have a look!
For sure if you have automatic and you don't get GPS you cannot adjust your calibration.

Regarding Power2Max the crank length is disabled since the calibration is not related to this measure. We use for pedal based PowerMeters.
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone »

OlyEST wrote: Fri Feb 17, 2017 6:05 pm
simone wrote: Fri Feb 17, 2017 2:21 pm
SRMUK wrote: Fri Feb 17, 2017 2:18 pm Where / how can I update date and time ? This will be really useful feature as saves having to go outside and wait and wait and wait !!
Main menu - System - date / time
a nice feature would be if date and time automatically update to current location (i.e., after changing time zone, for instance) when PC8 switched on first time and GPS is located.
or is this already possible?
Right now not.
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
Spawer
Posts: 29
Joined: Wed Feb 15, 2017 12:34 pm

Re: PC8 firmware: news - novità

Post by Spawer »

Ciao Simone !!! Oggi ho provato per strada il nuovo aggiornamento , è andato tutto bene , tranne che non trovava mai il segnale GPS , e da impostare qualcosa ?? In più arrivato a casa o caricato uscita tramite Wi-Fi tutto perfetto , ma ho notato che su Strava mi da un orario di partenza diverso dall'orario in cui sono partito io , la stessa cosa mi ricordo me la faceva quando avevo il pc7 e caricavo manualmente il file da srmx a Strava . Grazie !!
sciak
Posts: 15
Joined: Mon Feb 13, 2017 8:24 pm

Re: PC8 firmware: news - novità

Post by sciak »

Ciao, scusa se mi intrometto..
Volevo solo confermare quello che hai scritto, anch'io oggi prima uscita su strada col nuovo firmware e non c'é stato verso di trovare il GPS..non lo trova mai.
Su sträva invece dopo aver caricato l'attività , risulta un 30 40 minuti più lunga dello stesso file su SRMX..
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone »

sciak wrote: Sat Feb 18, 2017 4:47 pm Ciao, scusa se mi intrometto..
Volevo solo confermare quello che hai scritto, anch'io oggi prima uscita su strada col nuovo firmware e non c'é stato verso di trovare il GPS..non lo trova mai.
Su sträva invece dopo aver caricato l'attività , risulta un 30 40 minuti più lunga dello stesso file su SRMX..
ciao, per favore indicami, anche te come ho detto al precente post, il settaggio del GPS.
grazie!
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
Cancellara Emulator
Posts: 40
Joined: Mon Feb 13, 2017 10:12 pm

Re: PC8 firmware: news - novità

Post by Cancellara Emulator »

Ciao Simone. Volevo solo segnalare che, dopo l'aggiornamento, il PC8 non completa più la ricarica della batteria. Dopo una notte intera in carica, l'indicatore segna 80% che tra l'altro passa al 70% appena lo accendo. Non so se sia legato al firmware, ma prima dell'aggiornamento la ricarica indicata era completa! Grazie
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone »

Cancellara Emulator wrote: Sat Feb 18, 2017 5:01 pm Ciao Simone. Volevo solo segnalare che, dopo l'aggiornamento, il PC8 non completa più la ricarica della batteria. Dopo una notte intera in carica, l'indicatore segna 80% che tra l'altro passa al 70% appena lo accendo. Non so se sia legato al firmware, ma prima dell'aggiornamento la ricarica indicata era completa! Grazie
Questo è strano... non lo ho mai sentito. puoi provare ad effettuare una scarica quasi completa e poi ricaricarlo? Poi fammi sapere.
Grazie.
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
Spawer
Posts: 29
Joined: Wed Feb 15, 2017 12:34 pm

Re: PC8 firmware: news - novità

Post by Spawer »

Adesso dovrebbe andare fuori casa ho provato e adesso prende il segnale , domani riprovo su strada , poi vi aggiorno ;)
User avatar
armalite44
Posts: 6
Joined: Mon Feb 13, 2017 11:43 am
Location: Liège
Contact:

Re: PC8 firmware: news - novità

Post by armalite44 »

Hi,

A few days ago I posted that I've got a problem with GPS acquisition (no GPS at all indeed) with the new firmware so I try and try again (resetting gps following your instructions) and... nothing... no GPS.

Now the stranger thing, I roll back to PowerControl_8_Firmware_rev_2_1_8 and... direct GPS acquisition.

I'm a quite lost.

Thx
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone »

armalite44 wrote: Sat Feb 18, 2017 8:52 pm Hi,
A few days ago I posted that I've got a problem with GPS acquisition (no GPS at all indeed) with the new firmware so I try and try again (resetting gps following your instructions) and... nothing... no GPS.
Now the stranger thing, I roll back to PowerControl_8_Firmware_rev_2_1_8 and... direct GPS acquisition.
I'm a quite lost.
Thx
This sounds strange, but I am forwarding your case to the firmware developer.
One important this, since the firmware 2.1.8 had the GPS in a different place than the new one. Are you sure you settled up the correct GPS value into each bike profile?
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
Post Reply