New Features - Nuove Caratteristiche

🇺🇸 This forum ONLY contains issues related to the PC8DeviceAgent
🇮🇹 Questo forum contiene SOLO problematiche relative al PC8DeviceAgent
marco.m
Posts: 27
Joined: Mon Feb 13, 2017 7:04 am

Re: New Features - Nuove Caratteristiche

Post by marco.m »

simone wrote: Thu Feb 16, 2017 10:00 pm
marco.m wrote: Thu Feb 16, 2017 7:15 pm Ciao Simone!
Appena rientrato il PC8 ho subito installato il programma e il firmware, domani inizio a provarlo sul campo..
aggiornamento tutto ok, volevo solo segnalarti che con Windows 7, quando apporto delle modifiche tramite il Device Agent e dopo aver terminato premendo su "salva sul pc8" se stacco il pc8 come qunado il programma dice che posso farlo, il device agent si chiude inaspettatamente..
Con sistema Mac invece nessun problema..
complimenti per le novità!
Ma la rimozione dell'hardware la fai? È un dispositivo USB dove la scrittura viene fatta in maniera asincrona. Quindi effettuando la rimozione sicura forzi le scritture. Se lo lei al volo rischi di interrompere dei processi attivi. Se vuoi essere sicuro chiudi i DA e fai rimozione sicura dell'hardware!
Grazie Marco!!! ;)
quando ti avevo scritto non l'avevo fatta..
comuqnue oggi ho provato ma il pc mi dice che è impossible perchè ci sono processi in corso..quindi se stacco il pc 8 con il DA aperto non potendo fare la rimozione sicura, il DA si chiude "inaspettatamente"..
mentre se chiudo il DA l'unica soluzione è staccare il pc8 senza però poter fare(dice sempre che è in uso) la rimozione sicura...in questo caso però non si creano problemi/chiusure inaspettate...
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: New Features - Nuove Caratteristiche

Post by simone »

marco.m wrote: Sat Feb 18, 2017 5:32 pm
simone wrote: Thu Feb 16, 2017 10:00 pm
marco.m wrote: Thu Feb 16, 2017 7:15 pm Ciao Simone!
Appena rientrato il PC8 ho subito installato il programma e il firmware, domani inizio a provarlo sul campo..
aggiornamento tutto ok, volevo solo segnalarti che con Windows 7, quando apporto delle modifiche tramite il Device Agent e dopo aver terminato premendo su "salva sul pc8" se stacco il pc8 come qunado il programma dice che posso farlo, il device agent si chiude inaspettatamente..
Con sistema Mac invece nessun problema..
complimenti per le novità!
Ma la rimozione dell'hardware la fai? È un dispositivo USB dove la scrittura viene fatta in maniera asincrona. Quindi effettuando la rimozione sicura forzi le scritture. Se lo lei al volo rischi di interrompere dei processi attivi. Se vuoi essere sicuro chiudi i DA e fai rimozione sicura dell'hardware!
Grazie Marco!!! ;)
quando ti avevo scritto non l'avevo fatta..
comuqnue oggi ho provato ma il pc mi dice che è impossible perchè ci sono processi in corso..quindi se stacco il pc 8 con il DA aperto non potendo fare la rimozione sicura, il DA si chiude "inaspettatamente"..
mentre se chiudo il DA l'unica soluzione è staccare il pc8 senza però poter fare(dice sempre che è in uso) la rimozione sicura...in questo caso però non si creano problemi/chiusure inaspettate...
Chiudi prima il devi agent (quit, non in barra) poi stacca il PC8 facendo rimozione sicura.
E'un fatto noto perche windows tiene aperti i files (cosa che OSX non lo fa)
Fammi sapere.
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
marco.m
Posts: 27
Joined: Mon Feb 13, 2017 7:04 am

Re: New Features - Nuove Caratteristiche

Post by marco.m »

simone wrote: Sat Feb 18, 2017 6:42 pm
marco.m wrote: Sat Feb 18, 2017 5:32 pm
simone wrote: Thu Feb 16, 2017 10:00 pm
Ma la rimozione dell'hardware la fai? È un dispositivo USB dove la scrittura viene fatta in maniera asincrona. Quindi effettuando la rimozione sicura forzi le scritture. Se lo lei al volo rischi di interrompere dei processi attivi. Se vuoi essere sicuro chiudi i DA e fai rimozione sicura dell'hardware!
Grazie Marco!!! ;)
quando ti avevo scritto non l'avevo fatta..
comuqnue oggi ho provato ma il pc mi dice che è impossible perchè ci sono processi in corso..quindi se stacco il pc 8 con il DA aperto non potendo fare la rimozione sicura, il DA si chiude "inaspettatamente"..
mentre se chiudo il DA l'unica soluzione è staccare il pc8 senza però poter fare(dice sempre che è in uso) la rimozione sicura...in questo caso però non si creano problemi/chiusure inaspettate...
Chiudi prima il devi agent (quit, non in barra) poi stacca il PC8 facendo rimozione sicura.
E'un fatto noto perche windows tiene aperti i files (cosa che OSX non lo fa)
Fammi sapere.
Fatto come hai detto te e funziona tutto..
prima chiudevo dalla barra... se chiudo con quit funziona tutto..
problema risolto!
RasmussM
Posts: 118
Joined: Mon Feb 13, 2017 7:02 am
Location: Denmark

Re: New Features - Nuove Caratteristiche

Post by RasmussM »

HI Simone

what is the best choice for Power Control when not using a Sim Power Control ?
You do not have the required permissions to view the files attached to this post.
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: New Features - Nuove Caratteristiche

Post by simone »

RasmussM wrote: Sun Feb 19, 2017 7:34 pm HI Simone
what is the best choice for Power Control when not using a Sim Power Control ?
Ciao Morten,
this parameter is sent automatically by the PowerMeter to the PowerControl8 as soon as he connects/pair, so never mind!
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
RasmussM
Posts: 118
Joined: Mon Feb 13, 2017 7:02 am
Location: Denmark

Re: New Features - Nuove Caratteristiche

Post by RasmussM »

simone wrote: Wed Feb 15, 2017 8:24 am
RasmussM wrote: Wed Feb 15, 2017 7:15 am On My MacBook with Mac OS Sierra the DeviceAgent start automatic very time the Mac is starting up.
The DeviceAgent is not add to the user groups login items.
I remember this was also a issue in the past, but do not remember what to change, any one ho have an
idea where to look ?
Thanks in advance.
The PC8DeviceAgent has a menu item to set the automatic start. He writes into the services of your users.
Image
Simone,

Got it to work after the DA version from your dropbox.
Thanks.
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: New Features - Nuove Caratteristiche

Post by simone »

Super!
Thanks for your feedback!
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
tunney
Posts: 5
Joined: Mon Feb 13, 2017 11:07 am

Re: New Features - Nuove Caratteristiche

Post by tunney »

I set up to do an upload to email
before.png
I try to do an upload and no email is sent and when I look in DA the email address is now corrupted.
after.png
You do not have the required permissions to view the files attached to this post.
User avatar
simone
Site Admin
Posts: 1969
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: New Features - Nuove Caratteristiche

Post by simone »

tunney wrote: Mon Feb 20, 2017 10:09 am I set up to do an upload to email
before.png
I try to do an upload and no email is sent and when I look in DA the email address is now corrupted.
after.png
The location of those parameter is changed. Can you please re-enter and save?
Thanks
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image
sengewald
Posts: 43
Joined: Thu Feb 16, 2017 8:02 am

Re: New Features - Nuove Caratteristiche

Post by sengewald »

SeñorStark wrote: Wed Feb 15, 2017 3:02 pm Hello,

The Update was fine. Maybe i found a bug. If i upload the file from the DeviceAgent to the SRMX or download the file directly from the PC8 to SRMX the Data for Time, Energy, Dist, Power etc. is changing. In this case it's about 1,4 km. I think this is a lot.
There can always be a small difference(<3%) between SRMX and PC8 because SRMX recalculates the average values.
However when it comes to distance and speed, there can be a slightly bigger difference due to the limitation of GPS speed and distance.

The distance shown is calculated by interpolation between 2 GPS coordinates.
The speed is received ready calculated from the GPS modul.
GPS speed is optimized for use on a bicycle with average speed >20km/h

If there is no GPS signal for a short period of time, the distance is still interpolated between the 2 points, however speed is zero during this time
It seems like the speed received from the GPS modul is less accurate than the calculation of the distance
Post Reply