PC8 firmware: news - novità

🇺🇸 This forum ONLY contains issues related to the PC8 Firmware 2.5.x
🇮🇹 Questo forum contiene SOLO problematiche relative al firmware 2.5.x del PowerControl8
SeñorStark
Posts: 14
Joined: Mon Feb 13, 2017 7:56 am

Re: PC8 firmware: news - novità

Post by SeñorStark » Sun Mar 05, 2017 10:37 pm

Only the Belt
simone wrote:
Fri Mar 03, 2017 4:15 pm
SeñorStark wrote:
Fri Mar 03, 2017 4:08 pm
I have the same problem. Everytime i start the PC8 i need to re-pair the HR Belt.
simone wrote:
Thu Mar 02, 2017 9:45 pm

This is nice to know because part of the hr ant+ module is re-written.
Normally as soon as you re-pair once should work.
You mean that you need to re-pair every time?
Are there any other people having this problem in the forum?
only the belt or also other sensors?

User avatar
simone
Site Admin
Posts: 1908
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone » Mon Mar 06, 2017 7:48 am

SeñorStark wrote:
Sun Mar 05, 2017 10:37 pm
Only the Belt
simone wrote:
Fri Mar 03, 2017 4:15 pm
SeñorStark wrote:
Fri Mar 03, 2017 4:08 pm
I have the same problem. Everytime i start the PC8 i need to re-pair the HR Belt.

only the belt or also other sensors?
What belt are you using?
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image

User avatar
simone
Site Admin
Posts: 1908
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone » Mon Mar 06, 2017 7:50 am

ShopTo wrote:
Sun Mar 05, 2017 6:26 pm
Hi, is possible to have the function that the Pc8 also upload the metric's on trainingpeaks? will be good to have an update of the W/kg each day...
Can you make a list of those?
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image

SeñorStark
Posts: 14
Joined: Mon Feb 13, 2017 7:56 am

Re: PC8 firmware: news - novità

Post by SeñorStark » Mon Mar 06, 2017 5:54 pm

simone wrote:
Mon Mar 06, 2017 7:48 am
SeñorStark wrote:
Sun Mar 05, 2017 10:37 pm
Only the Belt
simone wrote:
Fri Mar 03, 2017 4:15 pm

only the belt or also other sensors?
What belt are you using?
I'm useing a Garmin ANT+ Belt

tommyzsak
Posts: 21
Joined: Tue Feb 14, 2017 7:52 pm

Re: PC8 firmware: news - novità

Post by tommyzsak » Thu Mar 09, 2017 4:17 am

When deleting a screenshot from the PC8, a message appears asking if one wants to delete the ride. I think the message should ask if one wants to delete the screenshot. Answering YES deletes the selected screenshot and does not affect the ride data.

Firmware: FW 2.5.4-210217

User avatar
papercut
Posts: 57
Joined: Fri Feb 10, 2017 9:47 am

Re: PC8 firmware: news - novità

Post by papercut » Thu Mar 09, 2017 5:07 pm

tommyzsak wrote:
Thu Mar 09, 2017 4:17 am
When deleting a screenshot from the PC8, a message appears asking if one wants to delete the ride. I think the message should ask if one wants to delete the screenshot. Answering YES deletes the selected screenshot and does not affect the ride data.

Firmware: FW 2.5.4-210217
Thanks, we will correct asap! 8-)
Dott. Samuele Scatena

Programmer @ SRM Italia

Image

Image

VTConline
Posts: 4
Joined: Mon Feb 13, 2017 4:38 am

Re: PC8 firmware: news - novità

Post by VTConline » Thu Mar 09, 2017 7:58 pm

FW:2.5.4 Update
I have 3 bikes with 2 different SRM's... all have their own speed pods...

I have now done about 2000km with the new FW and it has performed well. Very few data drops, handles the changes from bike to bike with ease.
Points I have noticed:

1) Uploads via my network & iPhone are ok, not great as they take too long and require me to be fairly close to my router / iPhone.
2) PC8 battery life does not appear as long with WiFi setting turned on? I have not timed it but this is a feeling I have?

All in all, looking good.
Thank you

gazario
Posts: 24
Joined: Mon Feb 13, 2017 9:03 am

Re: PC8 firmware: news - novità

Post by gazario » Fri Mar 10, 2017 5:23 pm

Ciao Simone,
ho visto che è disponibile una nuova versione del FW che dovrebbe mettere a posto il problema di dover fare la ricerca del cardio quando si accende il PC8. L'ho già caricata sul PC8.
In effetti con la versione 2.5.4 è successo anche a me di dover fare la ricerca del cardio e anche del sensore di velocità, o meglio, per quest'ultimo mi è stato sufficiente far girare la ruota una volta acceso il PC8, mentre con le versioni precedenti bastava aver fatto girare la ruota prima dell'accensione del PC8 e il sensore veniva preso.

Ho una domanda.
Nell'allenamento di ieri, per una decina di minuti, il cardio mi ha mostrato valori molto alti, superiori a 170 bpm, nonostante stessi facendo uno sforzo molto meno intenso, per poi regolarizzarsi su battiti in linea con lo sforzo eseguito.
Pensi possa essere legato al FW del PC8?
Utilizzo una fascia Garmin.

Grazie
Gian

User avatar
simone
Site Admin
Posts: 1908
Joined: Fri Feb 10, 2017 12:21 am
Location: Lucca
Contact:

Re: PC8 firmware: news - novità

Post by simone » Fri Mar 10, 2017 5:39 pm

gazario wrote:
Fri Mar 10, 2017 5:23 pm
Ciao Simone,
ho visto che è disponibile una nuova versione del FW che dovrebbe mettere a posto il problema di dover fare la ricerca del cardio quando si accende il PC8. L'ho già caricata sul PC8.
In effetti con la versione 2.5.4 è successo anche a me di dover fare la ricerca del cardio e anche del sensore di velocità, o meglio, per quest'ultimo mi è stato sufficiente far girare la ruota una volta acceso il PC8, mentre con le versioni precedenti bastava aver fatto girare la ruota prima dell'accensione del PC8 e il sensore veniva preso.

Ho una domanda.
Nell'allenamento di ieri, per una decina di minuti, il cardio mi ha mostrato valori molto alti, superiori a 170 bpm, nonostante stessi facendo uno sforzo molto meno intenso, per poi regolarizzarsi su battiti in linea con lo sforzo eseguito.
Pensi possa essere legato al FW del PC8?
Utilizzo una fascia Garmin.

Grazie
Gian
Ciao,
il nuovo firmware prevede una buona parte di riscrittura del modulo ANT+ per la freq. cardiaca. Anche io ho avuto valori strani con 2.5.4
Ing. Simone Stilli
Responsabile SRM Italia - Software Developer

Image

Image

rmc_goorden
Posts: 3
Joined: Mon Feb 13, 2017 12:14 pm

Re: PC8 firmware: news - novità

Post by rmc_goorden » Fri Mar 10, 2017 8:43 pm

Hi. Will an ordinary manuel start/stop be also implementee in the firmware upgrade. So simple I press start. I press stop. I am independent of ang GPS, independent whether my wheel is spinning or not, whether my cadence sensor picks up somethting, my speed sensor picks up something, no just a plain simple manuel start and stop. That will give me - the rider- full control over what I want to record or not. If anything. That would be top of my wishlist. 2017, a simple manual start and stop button (and if there is still time upload to Todays Plan). Hope its possible to include. Cheers.

Post Reply