PC8 firmware: news - novità

[simone]

HI Simone

In the new firmware 2.5.x I also found the problem on the GPS

PC8 display Charging power was 70-80%,can not reach 100%

At 2.17 23:33:28 start riding 24 minutes 23 seconds paused. when I started a new ride and found no power meter,I tried to connect the power meter many times, but I failed to connect the power meter.
(Note:My SRM Power meter starts for about 140 hours)

These tow days I have several times with PC8 and Garmin equipment try to connect the power meter, the same connection is not on the power meter

https://youtu.be/RVOBA9Y4GpM
PC8 connection power meter

https://youtu.be/0DEpZBzYnUA
Garmin device connection power meter

Ciao,
2.5.0 or 2.5.1? Did you downloaded the 2.5.1?

[KC HUNG]

HI Simone

In the new firmware 2.5.x I also found the problem on the GPS

PC8 display Charging power was 70-80%,can not reach 100%

At 2.17 23:33:28 start riding 24 minutes 23 seconds paused. when I started a new ride and found no power meter,I tried to connect the power meter many times, but I failed to connect the power meter.
(Note:My SRM Power meter starts for about 140 hours)

These tow days I have several times with PC8 and Garmin equipment try to connect the power meter, the same connection is not on the power meter

https://youtu.be/RVOBA9Y4GpM
PC8 connection power meter

https://youtu.be/0DEpZBzYnUA
Garmin device connection power meter

Ciao,
2.5.0 or 2.5.1? Did you downloaded the 2.5.1?

HI simone

This afternoon to download the firmware 2.5.1 successfully , also try to connect the power meter,the same connect is not on the power meter

[simone]

HI Simone
In the new firmware 2.5.x I also found the problem on the GPS
PC8 display Charging power was 70-80%,can not reach 100%
At 2.17 23:33:28 start riding 24 minutes 23 seconds paused. when I started a new ride and found no power meter,I tried to connect the power meter many times, but I failed to connect the power meter.
(Note:My SRM Power meter starts for about 140 hours)
These tow days I have several times with PC8 and Garmin equipment try to connect the power meter, the same connection is not on the power meter
https://youtu.be/RVOBA9Y4GpM
PC8 connection power meter
https://youtu.be/0DEpZBzYnUA
Garmin device connection power meter

Ciao,
2.5.0 or 2.5.1? Did you downloaded the 2.5.1?

HI simone
This afternoon to download the firmware 2.5.1 successfully , also try to connect the power meter,the same connect is not on the power meter

Thanks! what is: "the same connect is not on the power meter"?

[KC HUNG]

Ciao,
2.5.0 or 2.5.1? Did you downloaded the 2.5.1?

HI simone
This afternoon to download the firmware 2.5.1 successfully , also try to connect the power meter,the same connect is not on the power meter

Thanks! what is: "the same connect is not on the power meter"?

tes,after 2017.2.17 23:33:28 riding a pause,my PC8 will disconnect the power meter,and my power meter can no longer connect PC8

[eduriz]

Version 2.5.1 installed no problems. Test ride later this day!

ciao
edi

Test done today no problems found.

[jb20th]

I tried out the 2.5.1 update today. I had to manually connect all my ant+ sensors including my SRM there was no auto connect. Also whole riding there were several power drops as in the srm power number on the pc8. Also the upload failed several times.

[Preben]

Hi Simone
I filled out the form to have my PC8 whitelisted as a part of the beta program, but i dont get the SRM BETA area enabled in my Device Agent V.2.3.215. My S/N is 01226.
Hope you can fix it.
Thanks Preben

Ciao Preben,
I see your PC8 in the whitelist. Are you using Win or OSX? Which firmware currently you have?

Ciao Simone
Windows 10 and firmware 2.4.6

[Cancellara Emulator]

hai provato a resettare gli eventi del GPS?

Ciao, ho anche io lo stesso problema. GPS settato a 1s ma non funziona. Non so se su Strava c'è la traccia perchè se collego il PC8 al DA (come segnalato altrove, via Wi-Fi non carica nulla), mi resetta l'uscita e non riesco più a leggere i dettagli delle zone: resta solo lo storico. Anche questa è una cosa poco simpatica: col PC7 non accadeva! Ho inviato via mail le impostazioni del PC8 attuali! Grazie.

Se via WiFi non ti carica significa che non hai inserito bene le impostazioni, mi sembra strano che sia un problema generale perché vedo che la gente sta caricando.Cosa significa che il DA ti rosetta l'uscita e non vedi i dettagli delle zone???

Ho seguito la procedura passo passo. Dopo aver premuto WPS sul router, il PC8 dice che la rete è configurata. Le impostazioni sul DA sono a posto, davvero non capisco cosa non funzioni. Come segnalato in altro post, con l'installazione del 2.5.1, non funziona più la scorciatoia Pro+Set.
Se connetto via USB il PC8, funziona tutto, ma, esattamente come prima degli aggiornamenti, per il solo fatto di essere stato collegato al computer, il PC8 resetta l'uscita. Resta la traccia nello storico, ma i valori delle varie schermate vanno a zero (come se avessi iniziato un nuovo esercizio), comprese le schermate relative ai valori delle zone cardiache da me impostate e degli intermedi. Ripeto: basta che che parta il DA e automaticamente inizia un nuovo esercizio, cosa che con l'SRMWin e PC7 non succedeva.

[Cancellara Emulator]

Ciao,
2.5.0 or 2.5.1? Did you downloaded the 2.5.1?

HI simone
This afternoon to download the firmware 2.5.1 successfully , also try to connect the power meter,the same connect is not on the power meter

Thanks! what is: "the same connect is not on the power meter"?

[Cancellara Emulator]

Ciao,
2.5.0 or 2.5.1? Did you downloaded the 2.5.1?

HI simone
This afternoon to download the firmware 2.5.1 successfully , also try to connect the power meter,the same connect is not on the power meter

Thanks! what is: "the same connect is not on the power meter"?

About 70-80% level of charge: ->Well, than I was not the only user with charging problems! I solved simply unplugging and then plug in again the charger. Now it works properly!