Page 1 of 5

PC8 Firmware 2.5.7 - beta

Posted: Fri Mar 31, 2017 12:46 pm
by simone
🇺🇸
- Fixed highspeed charge switching to low speed from wall charger if going to standby
- Fixed coasting issue with ANT ready calculated power

Download here

(connect the PowerControl8 to the computer and put the firmware file into the firmware folder or use the local firmware update feature from the PC8DeviceAgent, than disconnect PowerControl8 and follow the instructions.

🇮🇹
- Risolto problema durante il passaggio delle velocità di caricamento in caso di connessione ad adattatore da muro
- Risolto il problema durante coasting (procedere senza pedalare) in caso di trasmissione di potenza RCP (Stages, Power2Max..)

Scarica qua

(connettere il PowerControl8 al computer e muovere il firmware nella cartella "firmware" oppure usate il PC8DeviceAgent tramite la funzione di aggiornamento firmware da locale; scollegare il PowerControl8 e seguire le istruzioni.

Image

Re: PC8 Firmware 2.5.7 - beta

Posted: Sat Apr 01, 2017 4:21 am
by tommyzsak
Thanks for the update!

Re: PC8 Firmware 2.5.7 - beta

Posted: Sat Apr 01, 2017 3:12 pm
by HerbB
Problem with the incorrect Power and cadence summary data is fixed with this firmware.
See here:
http://www.srmservice.com/forum/viewtopic.php?f=9&t=33
Thank´s
Herb

Re: PC8 Firmware 2.5.7 - beta

Posted: Mon Apr 03, 2017 5:19 am
by eduriz
Installed!!

Re: PC8 Firmware 2.5.7 - beta

Posted: Mon Apr 03, 2017 7:20 am
by Tillquist
The new firmware works really well, I also felt that battery life is improved

Re: PC8 Firmware 2.5.7 - beta

Posted: Mon Apr 03, 2017 8:08 pm
by PSJoyce
2.5.7 works well, except I am seeing a big, abrupt, altitude shift mid-rides. "Altitude calibration during ride" is not checked in Device Agent. I saw this in 2.5.6, too.

Re: PC8 Firmware 2.5.7 - beta

Posted: Tue Apr 04, 2017 7:00 pm
by hakkies
hi after i uploaded the new 2.5.7 firmware my rides record and when i want to upload them they disappear they don't upload or appear in the history?

Re: PC8 Firmware 2.5.7 - beta

Posted: Wed Apr 05, 2017 8:01 am
by RasmussM
simone wrote: ↑Fri Mar 31, 2017 12:46 pm 🇺🇸
- Fixed highspeed charge switching to low speed from wall charger if going to standby
- Fixed coasting issue with ANT ready calculated power

Download here

(connect the PowerControl8 to the computer and put the firmware file into the firmware folder or use the local firmware update feature from the PC8DeviceAgent, than disconnect PowerControl8 and follow the instructions.

🇮🇹
- Risolto problema durante il passaggio delle velocità di caricamento in caso di connessione ad adattatore da muro
- Risolto il problema durante coasting (procedere senza pedalare) in caso di trasmissione di potenza RCP (Stages, Power2Max..)

Scarica qua

(connettere il PowerControl8 al computer e muovere il firmware nella cartella "firmware" oppure usate il PC8DeviceAgent tramite la funzione di aggiornamento firmware da locale; scollegare il PowerControl8 e seguire le istruzioni.

Image
Have updated to FW 2.5.7 some days ago and also tested on some rides and all looks to work for me, also Upload by WIFI and also local with DA.

Re: PC8 Firmware 2.5.7 - beta

Posted: Wed Apr 05, 2017 8:07 am
by RasmussM
simone wrote: ↑Fri Mar 31, 2017 12:46 pm 🇺🇸
- Fixed highspeed charge switching to low speed from wall charger if going to standby
- Fixed coasting issue with ANT ready calculated power

Download here

(connect the PowerControl8 to the computer and put the firmware file into the firmware folder or use the local firmware update feature from the PC8DeviceAgent, than disconnect PowerControl8 and follow the instructions.

🇮🇹
- Risolto problema durante il passaggio delle velocità di caricamento in caso di connessione ad adattatore da muro
- Risolto il problema durante coasting (procedere senza pedalare) in caso di trasmissione di potenza RCP (Stages, Power2Max..)

Scarica qua

(connettere il PowerControl8 al computer e muovere il firmware nella cartella "firmware" oppure usate il PC8DeviceAgent tramite la funzione di aggiornamento firmware da locale; scollegare il PowerControl8 e seguire le istruzioni.

Image
When a ride is finished and I press Set+Pro for reset the PC8 its asking for Upload (also when WIFI is set to off on the PC8) is that a new feature?

Re: PC8 Firmware 2.5.7 - beta

Posted: Wed Apr 05, 2017 11:07 am
by simone
RasmussM wrote: ↑Wed Apr 05, 2017 8:07 am
simone wrote: ↑Fri Mar 31, 2017 12:46 pm
When a ride is finished and I press Set+Pro for reset the PC8 its asking for Upload (also when WIFI is set to off on the PC8) is that a new feature?